From the Navigation menu, select System → System Utilities → Dual Image Configuration.

Result:

The Dual Image Configuration window opens.

Select the image (Image1/Image2) being managed from the Image Name box.

Current-Active - Displays the currently active image on this unit.

Next-Active - Displays the image to be used on the next restart of this unit.

If required, enter an image description in the Image Description box.

This command associates a text description with an image. Any existing description will be replaced.

Perform the functions below as required:

• Click Submit to update image description on the switch.

  Equivalent CLI command: file descr {image1 | image2} <text-description>.

• Click Delete to delete he selected image from permanent storage on the switch.

  The image to be deleted must be a backup image. If the image is active or activated, an error is displayed.

  Equivalent CLI command: delete {image1 | image2}.

• Click Boot System Image to activate the specified image. It will be loaded by the boot loader and will be the active-image for subsequent reboots. The current active-image is marked as the backup-image for subsequent reboots. If the specified image doesn’t exist on the system, this command returns error.

  Equivalent CLI command: boot system {image1 | image2}.

• Click Update Bootcode to update the bootcode (boot loader) on the switch. The bootcode is read from the active-image for subsequent reboots. You must use this command only as part of an upgrade procedure for the pack.

  Equivalent CLI command: update bootcode.

• Click Update Backup Code to updates the backup partition code on the system with the active-image running on the system.

  Equivalent CLI command: update backupcode.

End of steps