Procedure 6-2: Enable/disable backplane Ethernet port
Before you begin
Obtain the work instructions for this procedure.
Step
1 |
Log in to the VLNC4x/VLNC6x circuit pack being provisioned. |
2 |
From the Navigation menu, select Port → Ethernet Port → Backplane Port Configuration. Result: The Backplane Port Configuration screen appears. |
3 |
Enable/disable the backplane port as required, then click Submit. |
4 |
From the Navigation menu, select Port → Ethernet Port → Backplane Port Summary and verify that the required parameters were provisioned correctly. Result: The Backplane Port Summary screen appears. End of steps |