| |
|
1 |
Log in to the VLNC6x circuit pack being provisioned.
|
2 |
|
If configuring a... |
Then... |
|
DS1 port (VLNC64), |
From the Navigation menu, select Port → PDH/TDM Port → DS1 Configuration. |
|
E1 port (VLNC6x), |
From the Navigation menu, select Port → PDH/TDM Port → E1 Configuration. |
|
T1 port (VLNC60/61/62), |
From the Navigation menu, select Port → PDH/TDM Port → T1 Configuration. |
|
OC3/STM1 port (VLNC64), |
From the Navigation menu, select Port → PDH/TDM Port → OC3/STM1 Configuration. |
Result:
The DS1/E1/T1/OC3/STM1 Configuration screen appears.
|
3 |
Enter the required parameters, then click Submit.
|
4 |
|
If configuring a... |
Then... |
|
DS1 port (VLNC64), |
From the Navigation menu, select Port → PDH/TDM Port → DS1 Summary and verify that the required parameters were provisioned correctly. |
|
E1 port (VLNC6x), |
From the Navigation menu, select Port → PDH/TDM Port → E1 Summary and verify that the required parameters were provisioned correctly. |
|
T1 port (VLNC60/61/62), |
From the Navigation menu, select Port → PDH/TDM Port → T1 Summary and verify that the required parameters were provisioned correctly. |
|
OC3/STM1 port (VLNC64), |
From the Navigation menu, select Port → PDH/TDM Port → OC3/STM1 Summary and verify that the required parameters were provisioned correctly. |
Result:
The Summary screen appears.
End of steps |
Before you begin