Procedure 7-1: Configure interface mode for VLNC6x circuit pack
Overview
Use this procedure to configure the T1 (SONET)/E1 (SDH) Ethernet interface mode for a VLNC6x circuit pack.
Before you begin
Obtain the work instructions for this procedure.
Step
1 |
Log in to the VLNC6x circuit pack being provisioned. |
2 |
From the Navigation menu, select PDH/TDM → Pack Configuration. Result: The Pack Configuration screen appears. |
3 |
Enter the required Interface Mode parameter, then click Submit. Result: Changing the Interface Mode will cause the system to reset. End of steps |