Procedure 7-3: Enable/disable inband loopbacks from DSX
Overview
Use this procedure to enable/disable inband loopbacks from the DSX on DS1/E1/T1 interfaces for VLNC6x circuit packs.
Before you begin
Obtain the work instructions for this procedure.
Step
1 |
Log in to the VLNC6x circuit pack being provisioned. |
2 |
From the Navigation menu, select PDH/TDM → Inband Loopback From DSX. Result: The Inband Loopback From DSX screen appears. |
3 |
Enable/disable inband loopbacks on the required interface, then click Submit. End of steps |