Procedure 7-5: Configure performance monitoring (PM) thresholds
Overview
Use this procedure to provision performance monitoring (PM) thresholds for interfaces on a VLNC6x circuit pack.
Before you begin
Obtain the work instructions for this procedure.
Step
1 |
Log in to the VLNC6x circuit pack being provisioned. |
2 |
From the Navigation menu, select PDH/TDM → TCA Threshold. Result: The TCA Threshold Configuration screen appears. |
3 |
Select the required interface/path type, interface/path number, interval, and PM parameter. Enter the required Threshold Value, then click Submit. End of steps |