Procedure 7-6: Enable/disable performance monitoring (PM)
Overview
Use this procedure to enable/disable performance monitoring (PM) on an interface on a VLNC6x circuit pack.
Before you begin
Obtain the work instructions for this procedure.
Step
1 |
Log in to the VLNC6x circuit pack being provisioned. |
2 |
From the Navigation menu, select PDH/TDM → Fault Management → PMON Admin. Result: The PMON Admin screen appears. |
3 |
Select the required Interface Number. Enable/disable the PMON State as required, then click Submit. End of steps |