Important!
Command Line Interface (CLI) messages or the Web GUI is required to interface with the VLNC60/61/62 Circuit Emulator, and VLNC64 Circuit Emulation Mini-Hub circuit packs.
The procedures in this chapter use the Web GUI with corresponding reference to the equivalent CLI commands. When using CLI commands, refer to the Alcatel-Lucent 1850 Transport Service Switch (TSS-5) Command Line Interface Guide.
Perform the following:
Obtain a copy of the Alcatel-Lucent 1850 Transport Service Switch (TSS-5) Command Line Interface Guide.
If required, become familiar with the Web GUI interface.
Obtain the IP address for the VLNC6x being provisioned.
Obtain the work instructions for the procedures.
All procedures in this chapter require a Personal Computer (PC).
Important!
If additional equipment is required to perform a specific procedure, the additional equipment is listed in the procedure.
| Copyright © 2011 Alcatel-Lucent. All rights reserved. |