From the Navigation menu, select Routing → DHCP Server → Pool Configuration to configure the DHCP server and client information. Enter the required parameters, then click Submit.

For the equivalent CLI commands and descriptions, see DHCP commands under Routing commands in the Alcatel-Lucent 1850 Transport Service Switch (TSS-5) Command Line Interface Guide.

Parameters:

• Pool Name: The DHCP address pool name on a DHCP server. An alphanumeric text string of 1-31 characters.

• DNS Server Addresses: The IP Address list of the DNS servers (up to 8 unique entries) available to the DHCP client. Use the IPv4 address format with 4 dot-separated decimal values ranging from 0 to 255. IP address 0.0.0.0 is not a valid value.

From the Navigation menu, select Routing → DHCP Server → Pool Summary to display the summary information for all DHCP configured pools including the Pool Name and DNS Server Addresses.

For the equivalent CLI commands and descriptions, see DHCP commands under Routing commands in the Alcatel-Lucent 1850 Transport Service Switch (TSS-5) Command Line Interface Guide.

End of steps