Procedure 14-4: Enable/Disable QoS differentiated services operational mode
Overview
Use this procedure to Enable/Disable the Differentiated Services operational mode.
While disabled, the Differentiated Services configuration is retained and can be changed, but it is not activated. When enabled, Differentiated Services are activated.
Before you begin
Obtain the work instructions for this procedure.
Step
1 |
Log in to the VLNC4x circuit pack being provisioned. |
2 |
From the Navigation menu, select QoS → Differentiated Services → DiffServ Configuration. Result: The DiffServ Configuration screen appears. |
3 |
Enable/Disable the DiffServ Admin Mode, then click Submit. End of steps |