Before you begin

Important!

Command Line Interface (CLI) commands or the Web GUI is required to interface with the VLNC40/42/42B Ethernet Aggregator, VLNC60/61/62 Circuit Emulator, and VLNC64 Circuit Emulation Mini-Hub circuit packs.

The procedures in this chapter use the Web GUI with corresponding reference to the equivalent CLI commands. When using CLI commands, refer to the Alcatel-Lucent 1850 Transport Service Switch (TSS-5) Command Line Interface Guide.

Required equipment

All procedures in this chapter require a Personal Computer (PC).

Important!

If additional equipment is required to perform a specific procedure, the additional equipment is listed in the procedure.