Card Inventory (NSP) report

Card Inventory (NSP) report overview

The Card Inventory (NSP) report differs from the Card Inventory report by including inventory data for NEs managed by the NFM-P and MDM (model-driven Nokia or multivendor NEs). The Card Inventory (NSP) report contents and format vary from the NFM-P-only Card Inventory report to accommodate its model-driven approach.

For MDM-mediated NEs, cards are mapped as IOM cards.

The Card Inventory (NSP) report shows the NEs and sites selected and proportion of empty and populated IOM, IMM, MDA, and Wavence slots. The default display is a pie chart and a set of tables displaying details.

The pie chart shows the empty and populated slot percentages of IOM/IMM/XCM/Wavence and MDA/XMA for the sites selected.
The Card Totals Per Node Type table displays the number of the Populated/Empty slot of IOM/IMM/XCM/Wavence and MDA/XMA.
The CPM/SF Card Totals table displays the Card Type, Card Software and Number of Card details of CPM/SF card type.
The IOM/IMM/XCM/Wavence Card Totals table displays the Card Type, Card Software and Number of Card details of IOM/IMM/XCM card type.
The MDA/XMA Card Totals table displays the Card Type, Card Software, and Number of Card details of MDA/XMA card type.
The Card Totals Per Node table provides the number of IOM/IMM/XCM/MDA/XMA for the selected sites.
The Full Node Inventory table provides information of NE Name, Node type, Card Type, Software Version, Slot Number, Part Number, Serial Number, Manufacture Assembly Number, and Manufacture Date of the sites selected.

Prerequisites

An MDM adapter is required for MDM-mediated NEs. Contact your technical support representative for more information. You must also enable statistics; see the Data Collection and Analysis Guide.

Report characteristics

The following table lists the principal report characteristics.

Table 16-1: Card Inventory (NSP) report characteristics

Characteristic	Value
Data type	NE configuration information
Source database	NSP main database
NE types supported	all 7705 SAR variants all 7750 SR and VSR variants all 7450 ESS variants all 7950 XRS variants all 7250 IXR variants all 7210 SAS variants OS 6860, OS 6450, OS 6900 Wavence MSS-1, Wavence MSS-4, Wavence MSS-8, Wavence MSS-O, Wavence MSS-1c, Wavence SA, 9500 MPR-A Chassis 1, 9500 MPR-A Chassis 4, 9500 MPR-A Chassis 8, 9500 MPR-E Chassis 1, 9500 MPR-E Chassis 4, 9500 MPR-E Chassis 8, 9500 MSS-1c, 9500 MSS-O ANSI, 9500 MSS-O ETSI, 9500 SA MDM-mediated NEs. The support for MDM-mediated NEs depends on the availability of the MDM adapters for the particular NE version and variants installed in the network.
NE types supported	Support is limited to NEs found in the network.
Report inputs	Prompt	Notes
	NE types	Search using partial names or wildcard (%). At least one NE ID or NE name must be entered.
	Name or name pattern for NEs
	NEs
	Warning Threshold %	Ranges from 0 to 100
	Critical Threshold %	Ranges from 0 to 100
	Logo Resource ID	The logo to add to the report. Enter the Resource ID of the logo image in the Images folder. The default is the Nokia logo. To create the report without a logo, leave the Logo Resource ID field blank.
	Logo Position	Choose Left, Middle, or Right. The logo appears on the left on the first page of the report if you choose Left or Middle.
	Show report output on one page	Select the check box to enable pagination. Note: Using the Show report output on one page option when creating reports as drill-downs may impact report rendering time. Nokia recommends disabling the Show report output on one page option when creating reports.
Drill-down support	No

Example

The following figures show a Card Inventory (NSP) report example.