Ports and Interfaces Utilization Details report

Ports and Interfaces Utilization Details report overview

The Ports and Interfaces Utilization Details report shows utilization information about network and/or access interfaces associated with existing termination objects (port, LAG, or bundle) for all possible modes (network, access, or hybrid).

Use cases

Capacity planning—Use the report to examine port and interface utilization patterns for planning future capacity requirements.

Prerequisites

The following table describes the aggregation rules that must be enabled and the file and accounting policies that must be configured for the NEs on which statistics are to be collected; see the NSP NFM-P Statistics Management Guide for information about configuring file and accounting policies. To view the report for granularities other than raw data, the aggregation rules must be enabled; see How do I configure analytics aggregation?.

Table 11-19: Ports and Interfaces Utilization Details report prerequisites

Monitored object class

Statistics class

Statistics collection

MIB name

NE types

equipment.PhysicalPort

equipment.InterfaceAdditionalStats

MIB-based

IF-MIB.ifXEntry

7210 SAS-D

7210 SAS-MXP

7210 SAS-R

7250 IXR

7705 SAR

7750 SR

lag.Interface

equipment.InterfaceAdditionalStats

MIB-based

IF-MIB.ifXEntry

7210 SAS-D

7210 SAS-MXP

7210 SAS-R

7250 IXR

7705 SAR

7750 SR

bundle.Interface

equipment.InterfaceAdditionalStats

MIB-based

IF-MIB.ifXEntry

7210 SAS-D

7210 SAS-MXP

7210 SAS-R

7250 IXR

7705 SAR

7750 SR

rtr.NetworkInterface

equipment.InterfaceAdditionalStats

MIB-based

IF-MIB.ifXEntry

7210 SAS-D

7210 SAS-MXP

7210 SAS-R

7250 IXR

7705 SAR

7750 SR

mpls.Interface

mpls.MplsInterfaceStats

MIB-based

TIMETRA-MPLS-MIB.vRtrMplsIfStatEntry

7210 SAS-D

7210 SAS-R

7250 IXR

7705 SAR

7750 SR

rtr.NetworkInterface

rtr.IpInterfaceAdditionalStats

rtr.IpInterfaceStats

rtr.SarIpInterfaceStats

MIB-based

TIMETRA-VRTR-MIB.vRtrIfStatsEntry

TIMETRA-VRTR-MIB.vRtrIfStatsExtEntry

7210 SAS-D

7210 SAS-R

7250 IXR

7705 SAR

7750 SR

service.AccessInterface

service.CompleteServiceEgressPacketOctets

Accounting, file, and log policies

completeSvcInEg policy

7250 IXR-R6

7750 SR

service.AccessInterface

service.CompleteServiceIngressPacketOctets

Accounting, file, and log policies

completeSvcInEg policy

7250 IXR-R6

7750 SR

service.AccessInterface

service.ServiceEgressOctets

Accounting, file, and log policies

svcIngressOctet policy

7210 SAS-D

7210 SAS-MXP

7210 SAS-R

service.AccessInterface

service.ServiceIngressOctets

Accounting, file, and log policies

svcEgressOctet policy

7210 SAS-D

7210 SAS-MXP

7210 SAS-R

equipment.PhysicalPort

ethernetequipment. Dot3Stats (only supported at the port level)

Performance statistics

EtherLike-MIB. dot3StatsEntry

7210 SAS

7250 IXR

7705 SAR

7750 SR

Report characteristics

The following table lists the principal report characteristics.

Table 11-20: Ports and Interfaces Utilization Details report characteristics

Characteristic

Value

Data type

Statistics

Source database

Auxiliary database

Report inputs

Prompt

Notes

End date

Calendar date or relative date (for example, two days ago) and time

Report range

Length of time to be reported, in hours or days

Granularity

Aggregation types:

  • None (raw data)

  • Hourly

  • Daily

  • Weekly

  • Monthly

Threshold value

Specify the threshold value

Region

Subregion

Only subregions below the top-level region are displayed in the prompt. Objects in the lower subregions are automatically selected when their subregion is selected.

KPI

Max Tx Throughput

Min Tx Throughput

Avg Tx Throughput

Max Rx Throughput

Min Rx Throughput

Avg Rx Throughput

Tx Volume

Rx Volume

Max Tx Utilization

Min Tx Utilization

Avg Tx Utilization

Max Rx Utilization

Min Rx Utilization

Avg Rx Utilization

Max Utilization

Min Utilization

Interface

Search using partial names or wildcard (%).

Select individual items or click Select All.

Logo Resource ID

The logo to add to the report. Enter the Resource ID of the logo image in the Images folder. The default is the Nokia logo. To create the report without a logo, leave the Logo Resource ID field blank.

Logo Position

Choose Left, Middle, or Right. The logo appears on the left on the first page of the report if you choose Left or Middle.

Show report output on one page

Select the check box to enable pagination.

Note: Using the Show report output on one page option when creating reports as drill-downs may impact report rendering time. Nokia recommends disabling the Show report output on one page option when creating reports.

Note: The report displays all content on one page regardless of whether the check box is enabled.

Drill-down support

No

Example

The following figure shows a report example.

Figure 11-12: Ports and Interfaces Utilization Details report
Ports and Interfaces Utilization Details report
Ports and Interfaces Utilization Details report
Ports and Interfaces Utilization Details report
Ports and Interfaces Utilization Details report
Ports and Interfaces Utilization Details report
Ports and Interfaces Utilization Details report
Ports and Interfaces Utilization Details report
Ports and Interfaces Utilization Details report
Ports and Interfaces Utilization Details report
Ports and Interfaces Utilization Details report
Ports and Interfaces Utilization Details report