Radio Links Summary report

Radio Links Summary report overview

The Radio Links Summary report displays a summary of the near end and far end details of radio links in the network, showing utilization, link availability, and peak throughput values of the links.

Prerequisites

Wavence nodes and radio links must be discovered in the NFM-P in order to be displayed in the report.

Note: When statistics collection is not enabled on the NFM-P, some report parameters are displayed at their default value. The following table describes the parameters, the default values that are displayed, and the related NFM-P statistic.

Parameter

Default displayed

NFM-P statistic

RSL (min/max)

-99

RSL Hop History Data stats (15Min) 

ODU temp

-99

UBT/MPT Equipment measurement

Throughput

0

Peak And Average Throughput and Link Utilization History Data Stats (15Min)/AggrTxEthernetStats

Utilization

0

Peak And Average Throughput and Link Utilization History Data Stats (15Min)/AggrTxEthernetStats

Detect Time

N/A

Peak And Average Throughput and Link Utilization History Data Stats (15Min)/AggrTxEthernetStats

Link Availability

0

PdhFrameHopHistoryDataStats24HrLogRecord

The following table lists the statistics that must be collected; see the NSP NFM-P Statistics Management Guide for information about configuring statistics collection.

Table 15-27: Radio Links Summary report prerequisites

Monitored object class

Statistics class

Statistics collection

MIB

NE types

Port /LAG

Ethernet

Ethernet Aggregate Tx Stats

ethAggrMaintTxEntry

Wavence MSS-1, Wavence MSS-4, Wavence MSS-8, Wavence MSS-O, Wavence MSS-E, Wavence MSS-HE, Wavence MSS-XE, Wavence MSS-1c, Wavence SA, Wavence UBT-SA, Wavence UBT-I, Wavence UBT-T XP, 9500 MPR-A Chassis 1, 9500 MPR-A Chassis 4, 9500 MPR-A Chassis 8, 9500 MPR-E Chassis 1, 9500 MPR-E Chassis 4, 9500 MPR-E Chassis 8, 9500 MSS-1c, 9500 MSS-O ANSI, 9500 MSS-O ETSI, 9500 SA

RSL

RSL Hop History Data stats (15Min)

opticsIMRSLHopHistoryDataEntry

G.826

Hop History Data stats (24Hr)

opticsIMPdhFrameHopHistoryDataEntry

Peak Throughput, Average Throughput Peak Link Utilization, Average Link Utilization

Peak And Average Throughput and Link Utilization History Data Stats (15Min)

opticsIMPeakAndAverageHistoryDataEntry

MPR

UBT/MPT Equipment measurement

opticsIMEquipmentExtenEntry

Report characteristics

The following table lists the principal report characteristics.

Table 15-28: Radio Links Summary report characteristics

Characteristic

Value

Data type

NE configuration information

Source database

NFM-P database

NE types supported

Wavence MSS-1, Wavence MSS-4, Wavence MSS-8, Wavence MSS-O, Wavence MSS-E, Wavence MSS-HE, Wavence MSS-XE, Wavence MSS-1c, Wavence SA, 9500 MPR-A Chassis 1, 9500 MPR-A Chassis 4, 9500 MPR-A Chassis 8, 9500 MPR-E Chassis 1, 9500 MPR-E Chassis 4, 9500 MPR-E Chassis 8, 9500 MSS-1c, 9500 MSS-O ANSI, 9500 MSS-O ETSI, 9500 SA

Support is limited to NEs found in the network.

Report inputs

Prompt

Notes

Logo Resource ID

The logo to add to the report. Enter the Resource ID of the logo image in the Images folder. The default is the Nokia logo. To create the report without a logo, leave the Logo Resource ID field blank.

Logo Position

Choose Left, Middle, or Right. The logo appears on the left on the first page of the report if you choose Left or Middle.

Show report output on one page

Select the check box to enable pagination.

Note: Using the Show report output on one page option when creating reports as drill-downs may impact report rendering time. Nokia recommends disabling the Show report output on one page option when creating reports.

Drill Down

Yes. Click on the link in the Radio Link column to display the Radio Link Inventory report. See Radio Link Inventory report

Example

The following figures show a report example.

Figure 15-32: Radio Links Summary report
Radio Links Summary report
Radio Links Summary report
Radio Links Summary report
Radio Links Summary report
Radio Links Summary report