SAP Utilization Details report

SAP Utilization Details report overview

The SAP Utilization Details report shows utilization percentage information for an SAP. This report can be launched on its own or as a drill-down of the Service Utilization Details report.

The default display is a set of time series graphs showing multi-axis line charts for the SAP total, ingress, egress, actual throughput, CIR, PIR, and percentage utilization for the selected SAP. Queues, meters, and policers values are also shown.

The report supports the Rate (kbps) rate type, Percent Port, and Percent Local rate types are supported for this report. The report also supports the port limit and local limit, which are the CIR/PIR values configured as percentages

For SR variants, 7705 SAR-Hm, and 7705 SAR-Hmc, the report supports QoS policies, virtual schedulers, queue overrides, policer overrides, and the egress aggregate rate limit.

For the 7210 SAS, the report supports QoS policies, queue/meter overrides, and the egress aggregate rate limit.

For the 7705 SAR, the report supports QoS policies and the egress aggregate rate limit.

It is not mandatory to configure QoS for this report since the default QoS settings apply.

Prerequisites

The following table describes the aggregation rules that must be enabled and the accounting policies that must be configured for the NEs on which statistics are to be collected; see the NSP NFM-P Statistics Management Guide for information about configuring an accounting policy. To view the report for granularities other than raw data, the aggregation rules must be enabled; see How do I configure analytics aggregation?.

Table 14-9: SAP Utilization Details report prerequisites

Aggregator name	Monitored object class	Statistics class	Statistics collection	Details	NE types
SAP Interface Stats Aggregator Egress	service.AccessInterface	service.CompleteServiceEgressPacketOctets	Accounting, file, and log policies	completeSvcInEg policy	7705 SAR 7705 SAR Hm 7750 SR
SAP Interface Stats Aggregator Ingress	service.AccessInterface	service.CompleteServiceIngressPacketOctets	Accounting, file, and log policies	completeSvcInEg policy	7250 IXR-R6 7705 SAR 7705 SAR Hm 7750 SR
Service Egress Octets Aggregator	service.AccessInterface	service.ServiceEgressOctets	Accounting, file, and log policies	svcEgressOctet policy	7210 SAS-D 7210 SAS Dxp 7210 SAS-K 7210 SAS-M 7210 SAS-Mxp 7210 SAS-R 7210 SAS-S/Sx 7210 SAS-T 7210 SAS-X Note: 7210 SAS-E and 7210 SAS-S/Sx are not supported due to NE limitations.
Service Ingress Octets Aggregator	service.AccessInterface	service.ServiceIngressOctets	Accounting, file, and log policies	svcIngressOctet policy	7210 SAS-D 7210 SAS Dxp 7210 SAS-K 7210 SAS-M 7210 SAS-Mxp 7210 SAS-R 7210 SAS-S/Sx 7210 SAS-T 7210 SAS-X

Use cases

Capacity planning—Use the report to examine SAP utilization patterns for planning future capacity requirements.

Report characteristics

The following table lists the principal report characteristics.

Table 14-10: SAP Utilization Details report characteristics

Characteristic	Value
Data type	Statistics
Source database	Auxiliary database
NE types supported	all 7210 SAS variants all 7250 IXR variants all 7450 ESS variants all 7705 SAR variants all 7750 SR and VSR variants all 7950 XRS variants
Service types supported	VPRN, VPLS, Epipe, Ipipe, Cpipe
Report inputs	Prompt	Notes
	End date	Calendar date or relative date (for example, two days ago) and time
	Report range	Length of time to be reported, in hours or days
	Granularity	Aggregation types: None (raw data) Hourly Daily Monthly
	Name or name pattern for customer	Search using partial names or wildcard (%). Select individual items or click Select All.
	Customer
	Name or name pattern for service
	Service
	Name or name pattern for SAP
	SAP
	Logo Resource ID	The logo to add to the report. Enter the Resource ID of the logo image in the Images folder. The default is the Nokia logo. To create the report without a logo, leave the Logo Resource ID field blank.
	Logo Position	Choose Left, Middle, or Right. The logo appears on the left on the first page of the report if you choose Left or Middle.
	Show report output on one page	Select the check box to enable pagination. Note: Using the Show report output on one page option when creating reports as drill-downs may impact report rendering time. Nokia recommends disabling the Show report output on one page option when creating reports.
Drill-down support	No

Example

The following figures show report examples.