Top Congested Access Network Locations Geographic Distribution report

Top Congested Access Network Location Geographic Distribution report overview

The Top Congested Access Network Locations Geographic Distribution report shows a table ranking the selected ANLs by impact intensity, showing the geographic locations of each ANL. The impact intensity value models the impact that congestion may have had on traffic flowing through the ANL for the selected time intervals. A higher value represents a higher potential impact, hence lower QoE for traffic at the location.

The table can be sorted ascending or descending by rank.

Congestion propensity

Congestion propensity is defined as the percentage of time an ANL is congested for a selected period of interest, for example, the past three days between 6 and 11 PM local time. The period of interest for congestion propensity can be the same as the report range or different.

Report characteristics

The following table lists the principal report characteristics.

Table 6-11: Top Congested Access Network Locations Geographic Distribution report characteristics

Characteristic	Value
Statistics type	AA Cflowd Flow Congestion
NSP Flow Collector required	Yes
Report inputs	Prompt	Notes
	Domain	Mobile or Wi-Fi (DSM)
	End date	Calendar date or relative date (for example, two days ago) and time
	Granularity	Aggregation types: None (raw data) Hourly Daily Monthly
	Report range	Length of time to be reported, in minutes, hours, days, or months
	Node Type	Search using partial names or wildcard (%). Select individual items or click Select All.
	Node
	Access Network Location Type
	Rank	Number of items to report
	Access Network Location State/Province	Search using partial names or wildcard (%). Select individual items or click Select All.
	Access Network Location City
	Show only Congested Locations	If this check box is selected, only the ANLs that are congested in the last interval of activity are displayed in the report output.
	Congestion Propensity Threshold	Enter a number between 1 and 100 to filter results based on congestion propensity.
	Impact Intensity Threshold	Enter a number between 1 and 100 to filter results based on impact insensity.
	Report Range for Congestion Propensity	Length of time to evaluate congestion propensity, in hours or days
	Days of Week for Congestion Propensity	Specify the intervals of interest in the Report Range for Congestion Propensity. Select individual items or click Select All.
	Hours of Day for Congestion Propensity
Drill-down support	Yes—Open Subscriber and Usage Details for Selected Access Network Location report for the selected ANL or, Radio-VLAN (in the case of the Wi-Fi [DSM] domain)

Example

The following figure shows a report example.