OAM PM BinGroups report

OAM PM BinGroups report overview

The OAM PM BinGroups report shows a distribution count of the PM bin groups in use. To use this report, a bin group policy must be distributed, PM sessions must be configured for each bin group, and PM sessions must be active and enabled.

Use cases

SLA reporting—Identify potential impact to service level agreements.

QoS analysis—Identify potential performance impact for a selected bin group.

Report inputs

The report has no inputs.

Report characteristics

The following table lists the principal report characteristics.

Table 13-3: OAM PM BinGroups report characteristics

Characteristic	Value
Data type	OAM testing
Source database	Auxiliary database
NE types supported	all 7750 SR variants all 7450 ESS variants all 7950 XRS variants all Wavence variants 7210 SAS-M 24F, 7210 SAS-M 24F 2XFP, 7210 SAS-M 24F 2XFP ETR, 7210 SAS-Mxp, 7210 SAS-T 12F 10T 4XFP, 7210 SAS-T 12F 10T 4XFP ETR, 7210 SAS-X 24F 2XFP, 7210 SAS-K, 7210 SAS-R6, 7210 SAS-R12, 7210 SAS-S/SX 1/10GE VC
Aggregation types	-
Drill-down support	Yes: Click on a bin group to show an OAM-PM Sessions report, showing the distribution of sessions using the bin group. From an OAM-PM Sessions report, click on a session to show an OAM-PM Sessions By Site report: an aggregate view of the active sessions on the site using the selected bin group. You can modify report inputs, for example, show sessions with no data. From an OAM-PM Sessions By Site report, click on a delay result to show an OAM-PM Latency report. From an OAM-PM Sessions By Site report, click on a jitter or loss result to show an OAM-PM Loss report.

Example

The following figures show report examples.