OAM PM BinGroups (NSP) report

OAM PM BinGroups (NSP) report overview

The OAM-PM BinGroups (NSP) report differs from the OAM PM BinGroups report by including OAM data for NEs managed by the NFM-P and MDM (model-driven Nokia NEs). The report shows a distribution count of the PM bin groups in use. To use this report, a bin group policy must be distributed, PM sessions must be configured for each bin group, and PM sessions must be active and enabled.

Use cases

SLA reporting—Identify potential impact to service level agreements.

QoS analysis—Identify potential performance impact for a selected bin group.

Prerequisites

The following sessions need to be performed in the NSP and NFM-P for the report to be created:

Report inputs

The following table shows the report inputs.

Table 17-1: OAM-PM BinGroups (NSP) report inputs

Prompt

Notes

Logo resource ID

The logo to add to the report. Enter the Resource ID of the logo image in the Images folder.

The default is the Nokia logo. To create the report without a logo, leave the Logo Resource ID field blank.

Logo position

Choose Left, Middle, or Right. The logo appears on the left on the first page of the report if you choose Left or Middle.

Report characteristics

The following table lists the principal report characteristics.

Table 17-2: OAM-PM BinGroups (NSP) report characteristics

Characteristic

Value

Data type

OAM testing

Source database

Auxiliary database

NE types supported

7210 SAS-M 24F, 7210 SAS-M 24F 2XFP, 7210 SAS-M 24F 2XFP ETR, 7210 SAS-Mxp, 7210 SAS-T 12F 10T 4XFP, 7210 SAS-T 12F 10T 4XFP ETR, 7210 SAS-X 24F 2XFP, 7210 SAS-K, 7210 SAS-R6, 7210 SAS-R12, 7210 SAS-S/SX 1/10GE VC

all 7450 ESS variants

all 7750 SR variants (supports Classic and MDM modes)

all 7950 XRS variants

all Wavence variants

Aggregation types

—

Drill-down support

Yes:

  1. Click on a bin group to show an OAM-PM Sessions (NSP) report, showing the distribution of sessions using the bin group.

  2. From an OAM-PM Sessions (NSP) report, click on a session to show an OAM-PM Sessions By Site report: an aggregate view of the active sessions on the site using the selected bin group.

    You can modify report inputs, for example, show sessions with no data.

  3. From an OAM-PM Sessions By Site (NSP) report, click on a delay result to show an OAM-PM Latency (NSP) report.

  4. From an OAM-PM Sessions By Site (NSP) report, click on a jitter or loss result to show an OAM-PM Loss (NSP) report.

Example

The following figure shows a report example.

Figure 17-1: OAM-PM BinGroups (NSP) report
OAM-PM BinGroups (NSP) report