Radio Equipment Health Monitoring Details report

Radio Equipment Health Monitoring Details report overview

The Radio Equipment Health Monitoring Details report shows the detailed port information of the power voltage, current and temperature values of the selected port. The default unit for temperature is Celsius. The report can be generated based on the port selected in the details report.

Use cases

Capacity planning—Use the report to examine the power voltage, current and temperature values on NEs of the respective ports.

Prerequisites

To create a Radio Equipment Health Monitoring Details report, perform the following items in the NFM-P:

enable the UBT/MPT Equipment Measurement (MPR) by selecting the Product Name as ‘Wavence SM’
enable the Wavence MPT STATS Aggregator to view the report for granularities other than raw data

Report characteristics

The following table lists the principal report characteristics.

Note: The value of -99 means the data value is not available.

Table 15-24: Radio Equipment Health Monitoring Details report characteristics

Characteristic	Value
Statistics type	Performance statistics
NSP flow collector required	No
NE types supported	Wavence MSS-1, Wavence MSS-4, Wavence MSS-8, Wavence MSS-O, Wavence MSS-E, Wavence MSS-HE, Wavence MSS-XE, Wavence MSS-1c, Wavence SA, 9500 MPR-A Chassis 1, 9500 MPR-A Chassis 4, 9500 MPR-A Chassis 8, 9500 MPR-E Chassis 1, 9500 MPR-E Chassis 4, 9500 MPR-E Chassis 8, 9500 MSS-1c, 9500 MSS-O ANSI, 9500 MSS-O ETSI, 9500 SA
Report inputs	Prompt	Notes
	Start date End date	Calendar date or relative date (for example, two days ago) and time
	Granularity	Aggregation types: None (raw data) Hourly Daily Monthly
	Port	Select a port from the drop-down list
	Temperature Unit	Celsius or Fahrenheit
	Temperature Threshold	Specify the value using expression like >,<,=,<=,>=.
	Power Threshold
	Current Threshold
	Voltage Threshold
	Logo Resource ID	The logo to add to the report. Enter the Resource ID of the logo image in the Images folder. The default is the Nokia logo. To create the report without a logo, leave the Logo Resource ID field blank.
	Logo Position	Choose Left, Middle, or Right. The logo appears on the left on the first page of the report if you choose Left or Middle.
	Show report output on one page	Select the check box to enable pagination. Note: Using the Show report output on one page option when creating reports as drill-downs may impact report rendering time. Nokia recommends disabling the Show report output on one page option when creating reports.
	Apply	Applies all the parameters and prepares the report based on the parameters entered.
	Reset	Resets all the parameters to default value.
Drill-down support	No

Example

The following figure shows a report example.