Synchronization Report

Synchronization Report overview

The Synchronization Report table lists the data for switch criteria and status for the selected NEs for the selected snapshot date.

Use cases

Network planning—Use the report to examine network wide Synchronisation settings and plan for synchronisation over networks.

Report characteristics

The following table lists the principal report characteristics.

Table 15-5: Synchronization Report characteristics

Characteristic

Value

Source database

NFM-P database

NE types supported

Wavence MSS-1, Wavence MSS-4, Wavence MSS-8, Wavence MSS-E, Wavence MSS-HE, Wavence MSS-XE, Wavence UBT-SA, Wavence UBT-I, Wavence UBT-T XP, Wavence NIM, 9500-MPR-A Chassis 1, 9500-MPR-E Chassis 1, 9500-MPR-A Chassis 4, 9500-MPR-E Chassis 4, 9500-MPR-A Chassis 8, 9500-MPR-E Chassis 8

Report inputs

Prompt

Notes

NE Types

Lists all Wavence NE Types

Name or name pattern for NEs

Enter the name pattern of the NE.

NEs

Up to 1000 entries from the available list of NEs are displayed. Select individual NEs or click Select All.

Logo Resource ID

The logo to add to the report. Enter the Resource ID of the logo image in the Images folder. The default is the Nokia logo. To create the report without a logo, leave the Logo Resource ID field blank.

Logo Position

Choose Left, Middle, or Right. The logo appears on the left on the first page of the report if you choose Left or Middle.

Show report output on one page

Select the check box to enable pagination.

Note: Using the Show report output on one page option when creating reports as drill-downs may impact report rendering time. Nokia recommends disabling the Show report output on one page option when creating reports.

Apply

Applies all the parameters and prepares the report.

Reset

Resets all the parameters to default value.

Drill-down support

No

Example

The following figures show a report example.

Figure 15-6: Synchronization Report
Synchronization Report