TMN In Band Details report

TMN In Band Details report overview

The TMN In Band Details report shows the detailed information of the network IP, routing protocol, and OSPF address for the selected NEs (managed through the common protocols using the network itself as a medium), and OSPF area.

Use cases

Use the report to examine the TMN in band details for ports based on the selected NEs and the OSPF area.

Report characteristics

The following table lists the principal report characteristics.

Table 15-8: TMN In Band Details report characteristics

Characteristic	Value
Source database	NFM-P database
NE types supported	Wavence MSS-4, Wavence MSS-8, Wavence MSS-E, Wavence MSS-HE, Wavence MSS-XE, Wavence UBT SA, 9500 MPR-E Chassis 4, 9500 MPR-E Chassis 8, 9500 MSS-O ETSI, 9500 SA
Report inputs	Prompt	Notes
	Name or name pattern for NEs	Enter the name pattern of the NE.
	NEs	Up to 1000 entries from the available list of NEs are displayed. Select individual NEs or click Select All.
	OSPF Area	Select the OSPF area for which the report is to be generated.
	Logo Resource ID	The logo to add to the report. Enter the Resource ID of the logo image in the Images folder. The default is the Nokia logo. To create the report without a logo, leave the Logo Resource ID field blank.
	Logo Position	Choose Left, Middle, or Right. The logo appears on the left on the first page of the report if you choose Left or Middle.
	Show report output on one page	Select the check box to enable pagination. Note: Using the Show report output on one page option when creating reports as drill-downs may impact report rendering time. Nokia recommends disabling the Show report output on one page option when creating reports.
	Apply	Applies all the parameters and prepares the report.
	Reset	Resets all the parameters to default value.
Drill-down support	No

Example

The following figures show a report example.

Note: The OSPF Area and OSPF Address are represented by N/A when the static routing protocol is used.