Top N Packet Drop—Network Ports report

Top N Packet Drop—Network Ports report overview

The Top N Packet Drop—Network Ports report show the top N FECs or queues that are dropping packets. Separate reports are available for access ports and for network ports. The default display is a table showing queue, forwarding class, and ingress, egress, and total packet and octet dropped information.

Note: The report can be run for 7210 SAS NEs that do not support forwarding classes. For these NEs, the report will display N/A in the Forwarding Class and Queue columns.

For 7210 SAS network ports, only one of the following statistics can be collected at one time:

network ingress octets
network ingress packets
network egress octets
network egress packets

The columns for the statistics not being collected will display -1.

It is not mandatory to configure QoS for this report since the default QoS settings apply.

Use cases

SLA monitoring—Use the report to examine traffic drop patterns, to ensure SLAs are met.

Prerequisites

The following table describes the aggregation rules that must be enabled and the accounting policies that must be configured for the NEs on which statistics are to be collected; see the NSP NFM-P Statistics Management Guide for information about configuring an accounting policy. To view the report for granularities other than raw data, the aggregation rules must be enabled; see How do I configure analytics aggregation?.

Table 14-45: Top N Packet Drop—Network Ports report prerequisites

Aggregator name	Monitored object class	Statistics class	Statistics collection	Details	NE types
Complete Network Ingress Packet Octets stats aggregator	equipment.Port ethernetequipment.EthernetPortSpecifics lag.Interface	CompleteNetworkIngressPacketOctets	Accounting, file, and log policies	completeNetIngrEg policy	7250 IXR 7450 ESS 7705 SAR 7705 SAR-H 7705 SAR Hm 7750 SR 7950 XRS
Complete Network Egress Packet Octets stats aggregator	equipment.Port ethernetequipment.EthernetPortSpecifics lag.Interface	CompleteNetworkEgressPacketOctets	Accounting, file, and log policies	completeNetIngrEgr policy	7250 IXR 7450 ESS 7705 SAR 7705 SAR-H 7705 SAR Hm 7750 SR 7950 XRS
Network Ingress Octets stats aggregator	equipment.Port	NetworkIngressOctets	Accounting, file, and log policies	netIngressOctet policy	7210 SAS-D 7210 SAS Dxp 7210 SAS-E 7210 SAS-K 7210 SAS-M 7210 SAS-Mxp 7210 SAS-R 7210 SAS-S/Sx 7210 SAS-T 7210 SAS-X 7250 IXR 7450 ESS 7705 SAR 7705 SAR-H 7705 SAR Hm 7750 SR 7850 VSA-8 7850 VSG 7950 XRS VSC
Network Egress Octets stats aggregator	equipment.Port	NetworkEgressOctets	Accounting, file, and log policies	netEgressOctet policy	7210 SAS-D 7210 SAS Dxp 7210 SAS-K 7210 SAS-M 7210 SAS-Mxp 7210 SAS-R 7210 SAS-S/Sx 7210 SAS-T 7210 SAS-X 7250 IXR 7450 ESS 7705 SAR 7705 SAR-H 7705 SAR Hm 7750 SR 7850 VSA-8 7850 VSG 7950 XRS VSC
Network Ingress Packets stats aggregator	equipment.Port	NetworkIngressPackets	Accounting, file, and log policies	netIngressPkt policy	7210 SAS-D 7210 SAS Dxp 7210 SAS-E 7210 SAS-K 7210 SAS-M 7210 SAS-Mxp 7210 SAS-R 7210 SAS-S/Sx 7210 SAS-T 7210 SAS-X 7250 IXR
					7450 ESS 7705 SAR 7705 SAR-H 7705 SAR Hm 7750 SR 7850 VSA-8 7850 VSG 7950 XRS VSC Note: SAS NEs use the network policy to retrieve stats at the FC level. They support only meters.
Network Egress Packets stats aggregator	equipment.Port	NetworkEgressPackets	Accounting, file, and log policies	netEgressPkt policy	7210 SAS-D 7210 SAS Dxp 7210 SAS-K 7210 SAS-M 7210 SAS-Mxp 7210 SAS-R 7210 SAS-S/Sx 7210 SAS-T 7210 SAS-X 7250 IXR 7450 ESS 7705 SAR 7705 SAR-H 7705 SAR Hm 7750 SR 7850 VSG 7850 VSA-8 7950 XRS VSC

Report characteristics

The following table lists the principal report characteristics.

Table 14-46: Top N Packet Drop—Network Ports report characteristics

Characteristic	Value
Data type	Statistics
Source database	Auxiliary database
Report inputs	Prompt	Notes
	Report range	Length of time to be reported, in hours or days
	End date	Calendar date or relative date (for example, two days ago) and time
	Granularity	Aggregation types: None (raw data) Hourly Daily Monthly
	NE types	Search using partial names or wildcard (%). Select individual items or click Select All.
	Name or name pattern for NEs
	NEs
	Port modes	Choose Network or Hybrid
	Port, LAG, or MC-LAG	Choose Port or LAG
	Name or name pattern for ports	Search using partial names or wildcard (%).
	Physical ports or LAGs or MC LAGs	Search using partial names or wildcard (%). Select individual items or click Select All.
	Top N	Enter the number of results to display. Enter a value between 1 and 100.
	Logo Resource ID	The logo to add to the report. Enter the resource ID for the logo image uploaded to the Images folder, if any. If no logo ID is provided, the logo area will be blank.
	Logo Position	Choose Left, Middle or Right. The logo will be placed on the left of the first page of the report for both the left and middle options.
	Show report output on one page	Select the check box to enable pagination. Note: Using the Show report output on one page option when creating reports as drill-downs may impact report rendering time. Nokia recommends disabling the Show report output on one page option when creating reports.
Drill-down support	No

Example

The following figure shows report examples.