To navigate to PE routers advertising an RT on a topology map
Steps
|
|
1 |
Choose Tools→Route Analysis→BGP Network Data from the NFM-P main menu. The BGP Network Data form opens.
|
2 |
Choose Route Target Retrieval Record (CPAM: Topology) from the object drop-down menu and click on the Search button. A list of timestamped RT retrieval record entries appears.
|
3 |
Choose an entry and click on the Properties button. The Route Target Retrieval Record (Edit) form appears with the General tab displayed.
|
4 |
Perform one of the following:
-
If you chose a VPN IPv4 RT retrieval record, click on the IP VPN Route Target tab. A list of VPN IPv4 targets is displayed.
-
If you chose an L2 VPN RT retrieval record, click on the L2 VPN Route Target tab. A list of L2 VPN targets is displayed.
|
5 |
Select a target from the list, click on the Navigate button, and choose one of the following options:
-
IGP View
-
ISIS View
-
OSPF View
|
6 |
The specified topology map opens with the next hop highlighted.
|
7 |
Close the topology map.
|
8 |
Close the Route Target Retrieval Record (Edit) form.
|
9 |
Close the BGP Network Data form.
End of steps |
© 2023 Nokia. Nokia Confidential Information
Use subject to agreed restrictions on disclosure and use.