To configure a composite service impact analysis

Steps
 
1 

Choose Tools→Route Analysis→Impact Analysis from the NFM-P main menu. The Impact Analysis form opens.

2 

Click on the Create button and choose Composite Service Impact Analysis. The Composite Service Impact Analysis (Create) form opens.

3 

Configure the ID and Name parameters.

4 

Click on the Select button in the Composite Service panel. The Select Composite Service - Composite Service Impact Analysis form opens with a list of composite services displayed.

5 

Choose a composite service and click on the OK button. The Select Composite Service - Composite Service Impact Analysis form closes and the Composite Service Impact Analysis (Create) form reappears with the composite service information displayed.

6 

Configure the Time Interval Type parameter.

7 

Perform one of the following:

  1. If you selected Rewind From/To Interval, configure the Start Time and End Time parameters.

  2. If you selected Rewind From Current Time, configure the Time Interval (in minutes) parameter.

  3. If you chose Current Status, continue to Step 8 .

8 

Click on the OK button. A dialog box appears.

9 

Click on the Yes button. The Composite Service Impact Analysis (Create) form closes.

End of steps

© 2023 Nokia. Nokia Confidential Information

Use subject to agreed restrictions on disclosure and use.