To add a simulated OSPF virtual link
Steps
1 |
Perform To open a scenario to open a simulation topology map. |
2 |
To create an OSPF virtual link, select two routers by pressing the Ctrl key. |
3 |
Right-click on one of the routers and choose Add→OSPF Virtual Link. The Simulated OSPF Virtual Link (Create) form opens with the General tab displayed. |
4 |
Click on the Select button next to the Area ID parameter. The Select OSPF Area - Simulated OSPF Virtual Link form opens. |
5 |
Choose an entry and click on the OK button. The Select OSPF Area - Simulated OSPF Virtual Link form closes. Note: The list includes only area 0.0.0.0. If area 0.0.0.0 does not appear, you must create it. |
6 |
Click on the Select button next to the Transit Area ID parameter. The Select OSPF Area form opens. |
7 |
Specify a filter for the search, if required, and click on the Search button. |
8 |
Choose an entry and click on the OK button. The Select OSPF Area form closes. |
9 |
Configure the parameters: |
10 |
Click on the OK button. The Simulated OSPF Virtual Link (Create) form closes. |
11 |
Click on the Impact Analysis button to analyze the status of the virtual links. End of steps |
© 2023 Nokia. Nokia Confidential Information
Use subject to agreed restrictions on disclosure and use.