To create a simulated ISIS router
Steps
1 |
Perform To open a scenario to open a simulation topology map. |
2 |
Right-click on the map and choose Add→Router from the contextual menu. The Simulated Router (Create) form opens with the General tab displayed. |
3 |
Configure the parameters: The CPAM automatically sets the attached flag in the ISIS router flags if the router is connected to both L1 and L2 levels. |
4 |
Click on the MPLS tab button. |
5 |
Configure the Administrative State parameter. |
6 |
Click on the RSVP tab button. |
7 |
Configure the Administrative State parameter. |
8 |
Click on the OK button. The Simulated Router (Create) form closes and the router appears on the topology map. |
9 |
Click on the Impact Analysis button on the SIMULATION - IGP Model - Scenario topology map, if required. |
10 |
Close the SIMULATION - IGP Model - Scenario topology map, if required. End of steps |
© 2023 Nokia. Nokia Confidential Information
Use subject to agreed restrictions on disclosure and use.