To create a simulated OSPF router

Steps
 
1 

Perform To open a scenario to open a simulation topology map.

2 

Right-click on the map and choose Add→Router from the contextual menu. The Simulated Router (Create) form opens with the General tab displayed.

3 

Configure the parameters:

  • Router ID

  • Name

  • Description

  • OSPF Router Flags

  • Administrative State

The CPAM automatically sets the ABR router flag if the router is connected to more than one area.

4 

Click on the MPLS tab button.

5 

Configure the Administrative State parameter.

6 

Click on the RSVP tab button.

7 

Configure the Administrative State parameter.

8 

Click on the OK button. The Simulated Router (Create) form closes and the router appears on the topology map.

9 

Click on the Impact Analysis button on the SIMULATION - IGP Model - Scenario topology map, if required.

10 

Close the SIMULATION - IGP Model - Scenario topology map, if required.

End of steps

© 2023 Nokia. Nokia Confidential Information

Use subject to agreed restrictions on disclosure and use.