To view and configure a simulated ISIS router
Steps
1 |
Perform To open a scenario to open a scenario. |
2 |
Right-click on a router and choose Properties from the contextual menu. The Simulated ISIS Router (Edit) form opens with the General tab displayed. |
3 |
Configure the parameters: The CPAM automatically sets the attached flag in the ISIS router flags if the router is connected to both L1 and L2 levels. |
4 |
Click on the MPLS tab button. |
5 |
Configure the Administrative State parameter. |
6 |
Click on the RSVP tab button. |
7 |
Configure the Administrative State parameter. |
8 |
Click on the OK button to save the configuration and close the Simulated Router (Create) form. |
9 |
Perform To add a simulated ISIS link to create a link between two ISIS routers, if required. |
10 |
Click on the Impact Analysis button on the SIMULATION - IGP Model - Scenario topology map. |
11 |
Close the SIMULATION - IGP Model - Scenario topology map. End of steps |
© 2023 Nokia. Nokia Confidential Information
Use subject to agreed restrictions on disclosure and use.