Perform To open a scenario to open a simulation topology map.

Right-click on the map and choose MPLS Model from the contextual menu. The SIMULATION-MPLS Model form opens.

Note: Alternatively, you can press the Ctrl key and select two or more routers. Right-click on one of the routers and choose Add→LSP. The Provisioned MPLS Path, MPLS-SIMULATION (Create) form opens with the General tab displayed.

The Source System IP parameter is automatically configured with the first router you select. The remaining routers are inserted as hops, as described in Step 8 .

Click on the Create button and choose Create LSP. The Provisioned MPLS Path, MPLS-SIMULATION (Create) form opens with the General tab displayed.

Click on the Select button next to the Source System IP parameter. The Select Source System IP / Router - IGP- SIMULATION form opens.

Specify a filter for the search, if required, and click on the Search button. A list of routers appears.

Choose an entry and click on the OK button. The Select Source System IP / Router - IGP- SIMULATION form closes.

Configure the parameters:

• Name

• Description

• Administrative State

Click on the Hops tab button.

Click on the Insert Hop button. The Provisioned Hop, MPLS - SIMULATION (Create) form opens.

Click on the Select button next to the IP Address parameter. The Select Hop IP Address form opens.

Specify a filter for the search, if required, and click on the Search button.

Choose an entry and click on the OK button. The Select Hop IP Address form closes.

Configure the Hop Type parameter.

Click on the OK button. The Provisioned Hop, MPLS - SIMULATION (Create) form closes. A dialog box appears.

Click on the OK button. The dialog box closes.

Repeat Step 9 to Step 15 to add additional hops.

Click on the OK button. The Provisioned MPLS Path, MPLS-SIMULATION (Create) form closes.

Close the SIMULATION-MPLS Model form.

Close the SIMULATION - Protocol Model - Scenario topology map.

End of steps