To monitor a simulated IP path
Steps
1 |
Perform To open a scenario to open a simulation topology map. |
2 |
Right-click on the topology map and choose Simulated Path Monitoring from the contextual menu. The Simulated Path Monitoring form opens. |
3 |
Click on the Create button. The Simulated IP Path Monitor (Create) form opens with the General tab displayed. Note: Alternatively, you can press the Ctrl key and select two routers. Right-click on one of the routers and choose Add→IP Path Monitor. The Simulated IP Path Monitor (Create) form opens with the General tab displayed. |
4 |
Configure the parameters: |
5 |
Configure the Source IP parameter or use the Select button to choose a source router. |
6 |
Configure the Source Length parameter. |
7 |
Configure the Destination IP parameter or use the Select button to choose a destination router. |
8 |
Configure the Destination Length parameter. |
9 |
Click on the Apply button to save the configuration. |
10 |
Click on the Path History tab button to view monitored IP paths. |
11 |
Close the Simulated IP Path Monitor (Create) form. |
12 |
Close the Simulated Path Monitoring form. End of steps |
© 2023 Nokia. Nokia Confidential Information
Use subject to agreed restrictions on disclosure and use.