To create a multicast group
Steps
1 |
Choose Tools→Route Analysis→Multicast Manager from the NFM-P main menu. The Multicast Manager form opens. |
2 |
Click on the Create button and choose Group from the contextual menu. The Multicast Group Address (Create) form opens with the General tab displayed. |
3 |
Configure the Group Address parameter. |
4 |
Click on the Sources tab button. |
5 |
Click on the Create button. The Multicast Source Address (Create) form opens. |
6 |
Configure the Multicast Source Address parameter. |
7 |
Click on the OK button. The Multicast Source Address (Create) form closes. |
8 |
Repeat Step 5 to Step 7 to add additional multicast source addresses, if required. |
9 |
Click on the Domains tab button. |
10 |
Click on the Create button. The Group Domain Binding (Create) form opens. |
11 |
Click on the Select button next to the Domain id parameter. The Select Domain Pointer - Group Domain Binding form opens. |
12 |
Choose an entry and click on the OK button. The Select Domain Pointer - Group Domain Binding form closes. |
13 |
Click on the OK button. The Group Domain Binding (Create) form closes. |
14 |
Repeat Step 10 to Step 13 , if required. |
15 |
Click on the OK button. The Multicast Group Address (Create) form closes. |
16 |
Close the Multicast Manager. End of steps |
© 2023 Nokia. Nokia Confidential Information
Use subject to agreed restrictions on disclosure and use.