To highlight routers for a multicast group or mask
Steps
1 |
Perform To open the multicast topology view to open the multicast topology view. |
2 |
Right-click on the map and choose Highlight Routers for a Multicast Group / Mask from the contextual menu. The Highlight Routers for a Multicast Group / Mask form opens. |
3 |
Click on the Select button next to the Multicast Group Prefix parameter. The Select Multicast Group form opens. |
4 |
Specify a filter for the search, if required, and click on the Search button. |
5 |
Choose an entry and click on the OK button. The Select Multicast Group form closes. |
6 |
Configure the parameters: |
7 |
Click on the OK button. The Highlight Routers for a Mulitcast Group / Mask form closes and the multicast routers with the selected protocol for the selected multicast group prefix are highlighted on the map. |
8 |
Click on the Legend button at the top of the topology map and choose Highlight Sessions from the contextual menu. The Legend - Multicast Topology form opens with the Highlight Sessions tab displayed. See To manage active highlights on a topology map for information about how to manage active highlights on a topology map. |
9 |
Close the multicast topology view. |
10 |
Close the Multicast Manager form. End of steps |
© 2023 Nokia. Nokia Confidential Information
Use subject to agreed restrictions on disclosure and use.