To view OAM test results of an IP, LSP, or P2MP path monitor
Steps
|
|
1 |
Choose Tools→Route Analysis→Path Monitoring from the NFM-P main menu. The Path Monitoring form opens.
|
2 |
Choose one of the following from the object menu and click on the Search button.
-
IP Path Monitor (Monitored Path)
-
LSP Path Monitor (Monitored Path)
-
P2MP LSP Path Monitor (Monitored Path)
|
3 |
Choose an entry and click on the Properties button. The IP/LSP/P2MP LSP Path Monitor (Edit) form opens with the General tab displayed.
|
4 |
Click on the Auto OAM tab button. The General tab is displayed.
|
5 |
Click on the Results tab button. A list of results appears.
|
6 |
Choose an entry and click on the Properties button. The Tested Entity Result (Edit) form opens with the General tab displayed.
|
7 |
View information about the execution status.
|
8 |
Click on the Results tab button.
|
9 |
Click on the Search button.
|
10 |
Choose an entry and click on the Properties button. The Test_type Result - Result (Edit) form opens with the General tab displayed.
|
11 |
View the test result details. Click on the tab buttons for information about the test.
|
12 |
Close the Test_type Result - Result (Edit) form. The Tested Entity Result (Edit) form reappears.
|
13 |
Click on the View Associated Record button to view the IP, LSP, or P2MP LSP path record associated with the test result, if necessary. The IP/LSP/P2MP LSP Path Record (Edit) form appears with the General tab displayed.
|
14 |
Close the IP/LSP Path Record (Edit) form.
|
15 |
Close the Tested Entity Result (Edit) form.
|
16 |
Close the IP/LSP Path Monitor (Edit) form.
|
17 |
Close the Path Monitoring form.
End of steps |
© 2023 Nokia. Nokia Confidential Information
Use subject to agreed restrictions on disclosure and use.