To monitor an SDP tunnel
Steps
1 |
Choose Tools→Route Analysis→Topology_type→IGP_Administrative_Domain from the NFM-P main menu. The appropriate topology map appears showing the network objects. |
2 |
Right-click on the topology map and choose Highlight SDP from the contextual menu. The Find SDP form opens. |
3 |
Configure the filter criteria and click on the Search button. A list of service tunnels is displayed. |
4 |
Select a service tunnel in the list and click on the Properties button. The Tunnel (Edit) form opens with the General tab displayed. |
5 |
Click on the Create/Edit Path Monitor button. The IP Path Monitor (Create) form opens with the General tab displayed. Note: If a path monitor already exists for the service tunnel, the IP Path Monitor (Edit) form opens with the General tab displayed. |
6 |
Configure the parameters, if required: Note: The Source IP, Source Length, Destination IP, and Destination Length parameters are automatically configured with the system IP address of the site and default length. |
7 |
Click on the Apply button. |
8 |
To create a bidirectional IP path monitor, click on the Create Bidirectional IP Path Monitor button. The Bidirectional IP Path Monitor (Create) form opens with the General tab displayed. Perform Step 3 to Step 13 of To monitor a bidirectional IP network path . |
9 |
Click on the Path History tab button to view monitored IP paths. |
10 |
Click on the Service Tunnels tab button to view monitored GRE and LDP tunnels. |
11 |
Close the IP Path Monitor (Edit) form. The Tunnel (Edit) form reappears. |
12 |
To navigate to a service tunnel on the topology map, perform the following:
End of steps |
© 2023 Nokia. Nokia Confidential Information
Use subject to agreed restrictions on disclosure and use.