To configure and view CPAM topology map icon labels

General information

You can configure the type of information you need to be displayed on the CPAM topology map icon labels.

Steps
 
1 

Choose Application→User Preferences from the NFM-P main menu. The User Preferences form opens.

2 

Click on the Topology tab.

3 

Select one of the following topology map icons:

  • CPAM Subnets

  • CPAM Routers

  • CPAM Simulated Routers

  • CPAM Simulated Subnets

4 

Configure Text Field #1 and Text Field #2 to identify the information you need to display in each map icon label. You can choose one of the following for each text field:

  • CPAM Subnets and CPAM Simulated Subnets

    • Description

  • CPAM Routers and CPAM Simulated Routers

    • Name

    • Management IP Address

    • Network Element Name

    • Description

    • Router ID

    • CPAM Name

Note: Choose CPAM Name to display the NE name for all of the SNMP-polled NEs and GNEs. The displayed name for an NE is:

  • the managed NE name for fully managed NEs

  • the ISIS protocol name for ISIS-supported NEs if an NE is unmanaged

  • "N/A" if an NE is both unmanaged and non- ISIS-supported

5 

Save your changes and close the form.

End of steps

© 2023 Nokia. Nokia Confidential Information

Use subject to agreed restrictions on disclosure and use.