To assign a router ID to ISIS routers with no TE router ID

When to use

Perform this procedure to assign a router ID to an ISIS router with no TE router ID when the TopologyIsisSystemError alarm is raised by the CPAM.

Steps
 

Choose Tools→Route Analysis→IGP Network Data from the NFM-P main menu. The IGP Network Data form opens.


Choose ISIS System ID Mapping (CPAM: Topology) and click Search.


Choose an entry and click Properties. The ISIS System ID Mapping (Edit) form opens.


Configure the Router ID parameter.

Note: The Router ID should be an IP address that is reachable (via ISIS) on the node.


Save your changes and close the forms.

End of steps

© 2023 Nokia. Nokia Confidential Information

Use subject to agreed restrictions on disclosure and use.