Standalone system installation workflow

Description

The following is the sequence of high-level actions required to install a standalone NFM-P system.

Stages

Note: The link in each stage leads to a section in To install a standalone NFM-P system.

 

Configure firewalls between components, as required; see Check and configure firewalls.


Download the required NFM-P installation files; see Download installation files.


Install the standalone database; see Install standalone database.

  1. Run a script to prepare for the Oracle software installation.

  2. Install the database packages.

  3. Create the standalone database.


Install the standalone main server; see Install standalone main server.

  1. Install the main server packages.

  2. Create and apply the main server configuration.


If required, enable Windows Active Directory for client access; see Enable Windows Active Directory access.


If required, configure ADFS to enable Common Access Card, or CAC, client access; see Enable CAC access.


Start the main server; see Start standalone main server.


Install one or more of the following optional components, as required; see Install optional components:

  • auxiliary server

  • auxiliary database


Install one or more single-user GUI clients or client delegate servers; see Install GUI clients.


10 

Stop the PKI server; see Stop PKI server.


11 

If any required firewalls between components are disabled, enable the firewalls, as required; see Configure and enable firewalls.