To uninstall an auxiliary server

Description

The following steps describe how to remove the NFM-P auxiliary server software from a station.

Note: In a redundant NFM-P system, you must uninstall the auxiliary servers in the following order:

Note: You require the following user privileges on the auxiliary server station:

Note: The following RHEL CLI prompts in command lines denote the active user, and are not to be included in typed commands:

Steps
 

Stop the auxiliary server.

  1. Log in to the auxiliary server station as the nsp user.

  2. Open a console window.

  3. Enter the following:

    bash$ cd /opt/nsp/nfmp/auxserver/nms/bin ↵

  4. Enter the following:

    bash$ ./auxnmsserver.bash auxstop ↵

  5. Enter the following:

    bash$ ./auxnmsserver.bash auxappserver_status ↵

    The auxiliary server is stopped when the following message is displayed:

    Auxiliary Server is stopped 

    If the command output indicates that the server is not completely stopped, wait five minutes and then re-enter the command in this step to check the server status.

    Do not proceed to the next step until the server is completely stopped.


Enter the following to switch to the root user:

bash$ su - ↵


Enter the following commands in sequence to remove the NFM-P packages:

dnf remove nsp-nfmp-aux-server ↵

dnf remove nsp-nfmp-config ↵

dnf remove nsp-nfmp-jre ↵

dnf remove nsp-nfmp-semvalidator

After you enter a command, the dnf utility resolves any dependencies and displays the following prompt:

Installed size: nn G 

Is this ok [y/N]: 


Enter y. The following is displayed:

Downloading Packages:

Running transaction check

Transaction check succeeded.

Running transaction test

Transaction test succeeded.

Running transaction check

Uninstalling the NFM-P package...

As each package removal completes, the following is displayed:

Complete!


Return to Step 4 as required to remove the next package in the sequence.


When all packages are removed, enter the following to reboot the auxiliary server station:

systemctl reboot ↵

The station reboots.


Remove the /opt/nsp/nfmp/auxserver directory and contents.

End of steps