Workflow to deploy large-scale optical and classic IP management

Description

The following is the sequence of high-level actions required to deploy large-scale optical and classic IP management.

Note: Before you attempt to deploy an NSP component, you must review and comply with the deployment requirements and restrictions in the NSP Planning Guide.

Note: Some components of an NSP system can be at different releases; see the NSP Release Notice for component release compatibility information.

Note: User group properties are component-specific. When a user of a specific NSP component requires authorization to access an additional component, the user group must be re-created in the new component in order for them to access the functions associated with the new component. Instructions for creating a user group are in the component documentation.

Stages

1	Install an NSP cluster. Perform To install the NSP.
2	Install the NFM-P, as described in NFM-P installation; configure the NFM-P to use the PKI server for TLS.
3	If you are adding an existing NFM-P system to the NSP cluster, add the servers to the NFM-P system; perform To add an independent NFM-P to an existing NSP deployment.
4	Install the WS-NOC, as described in the WS-NOC HW and OS Installation Guide and the WS-NOC Installation Guide.
5	If you are adding an NSP cluster to an existing WS-NOC system, perform To integrate a containerized Release 21.12, 22.6, 22.12, 23.6, or 23.12 WS-NOC and the NSP.
6	Perform To map external user groups to predefined WS-NOC roles.