How do I filter the map view?

Purpose

You can configure filters in the map to control the display of information and reduce clutter. The Operational map view allows filtering, with or without the Utilization option. You can add up to five filters.

Steps
 
1 

In the map, click png14.png Add Filter and select one of the filter types. A chip filter png15.png is added to the map.

In the Operational map view, the filter types are Alarm Severity, Chassis Type, Network Type, Product Type, and Status. You can add up to three filters. If the Utilization option is enabled, the filter types are Utilization and Capacity.

2 

Click Filter and select a criterion related to the filter type.

The chip filter is applied to the map.

3 

Click png16.png Close on a chip filter to remove it from the map.

End of steps