How do I configure system alarm settings?

Purpose

Use this procedure to configure alarm handling options for alarm messages originating from the NSP system. These settings apply to NSP, WS-NOC, and MDM alarms. NFM-P alarm settings are configured in the NFM-P GUI; see the NFM-P Administrator Guide.

You must have administrator privileges to configure alarm settings.

Steps
 
1 

In the Network Map And Health, Current Alarms view click the More button png5.png and select Settings. The Alarm Settings form opens.

2 

Click System Settings on the left-hand panel to configure system-wide alarm settings.

3 

Enable the Alarm Severity Settings option and then configure manual options, as required.

4 

Enable the Alarm Deletion Settings option, as required, and then enable and configure any of the following options:

  • Manual Alarm Deletion Settings

  • Correlated Alarm Settings for Manually Deleted Alarms

  • Automatic Alarm Deletion Settings

5 

Enable the alarm acknowledgement policy, as required.

6 

Save your changes.

End of steps