How do I configure the transfer of result files?

Purpose

You can enable the transfer of result files to a file server in the following formats.

  • NAT

  • IPDR

  • CSV

Note: A minimum 1-Gbyte/s link is required between the NSP Flow Collector and the file server.

Note: SFTP transfers are considerably slower than FTP transfers.

Steps
 
1 

Click on one of the following tabs:

  • NAT Transfer

  • IPDR Transfer

  • CSV Transfer

2 

Configure the parameters:

  • Enable Transfer—whether file transfers are enabled

  • Transfer Protocol—FTP or SFTP

  • IP Address / Host name—file server address

  • Port—file server port

  • Location—file server directory that is to contain the files

  • User—FTP or SFTP username

  • Password—FTP or SFTP password

3 

Click Save Configuration. The configuration is saved.

End of steps