Is this content helpful?
You can enable the transfer of result files to a file server in the following formats.
NAT
IPDR
CSV
Note: A minimum 1-Gbyte/s link is required between the NSP Flow Collector and the file server.
Note: SFTP transfers are considerably slower than FTP transfers.
Click on one of the following tabs:
NAT Transfer
IPDR Transfer
CSV Transfer
Configure the parameters:
Enable Transfer—whether file transfers are enabled
Transfer Protocol—FTP or SFTP
IP Address / Host name—file server address
Port—file server port
Location—file server directory that is to contain the files
User—FTP or SFTP username
Password—FTP or SFTP password
Click Save Configuration. The configuration is saved.
End of steps