To configure OTDR on 1830 VWM
Purpose
Perform this procedure to configure Optical Time Domain Reflectometer (OTDR) on the supported 1830 VWM. OTDR functionality is used as a diagnosis to detect fiber breaks and open connectors in the network, eliminating the delay in fault detection.
Steps
1 |
On the equipment tree, expand Network→1830–VWM-OSU NE→Shelf→Card Slot→Port object and choose Properties. The Physical Port (Edit) form opens. |
2 |
Click on the OTDR tab, and then on the OTDR Specifics tab. |
3 |
Configure the OTDR Mode in the OTDR panel. |
4 |
Configure the Execution Measurement parameter in the OTDR Measurement panel. Execution details are populated under the Execution Details panel. |
5 |
Click on the OTDR Results tab. The results are displayed in a tabular format. Click Resync to display the latest OTDR results. End of steps |