To configure an IPv6 firewall domain

Purpose

Perform this procedure to configure an IPv6 firewall domain on a NAT configuration on a base or VPRN routing instance.

Steps
 

Do one of the following:

  1. To configure an IPv6 firewall domain on a base routing instance, in the navigation tree Routing view, expand Network→NE→Routing Instance. Right-click on a routing instance icon that has a NAT configuration and choose Properties. The Routing Instance (Edit) form opens.

  2. To configure an IPv6 firewall domain on a VPRN routing instance, choose Manage→Service→Services from the NFM-P main menu. The Manage Services form opens. Choose a VPRN service and click Properties. The VPRN Service (Edit) form opens. On the service navigation tree, expand the Sites icon. Right-click on a routing instance icon that has a NAT configuration and choose Properties. The Routing Instance (Edit) form opens.


Click on the NAT tab.


Click on the Firewall Domain tab.


Click Create or select an existing firewall domain in the list and click Properties. The Firewall Domain (Create|Edit) form opens.


Configure the parameters on the General tab and select an ISA group.


Click on the Prefixes tab to configure firewall prefixes.

  1. Click Create or select an existing firewall prefix in the list and click Properties. The Firewall Prefix (Create|Edit) form opens.

  2. Configure the parameters.


Save your changes and close the forms.

End of steps