To configure an APN policy

Steps
 

Choose Policies→Residential Subscriber from the NFM-P main menu. The Residential Subscriber Policies form opens.


Click Create→APN Policy or select an existing APN policy and click Properties. The APN Policy (Create|Edit) form opens.

Modifying an active APN policy is potentially service-affecting. Ensure that you consider the implications of reconfiguring the policy before you proceed.


On the General tab, configure the Displayed Name parameter.


Click on the APN tab to configure APN entries for the APN policy.

  1. Click Create or select an existing APN entry and click Properties. The APN (Create|Edit) form opens.

  2. Configure the Displayed Name parameter.

  3. Configure the APN entry in ONE of the following ways:
    • For RADIUS authentication; select a RADIUS authentication policy

    • For Diameter authentication; select a Diameter authentication policy

    • For LUDB authentication; select a Local user database

    • For default service; select a service ID and interface ID

      Configure AMBR QoS mapping downlink and uplink information, if required.

  4. Save your changes and close the form.


Click OK to save the policy and close the form, or click Apply to save the policy. See To release and distribute a policy to distribute the policy to NEs.

End of steps