To configure a QoS port list policy

Purpose

A QoS port list policy defines TCP/UDP ports or ranges of port values for use as IPv4 and IPv6 match criteria.

QoS port list policies are associated with QoS network policies; see To configure a QoS network policy.

Tabs on the QoS - Port List form show the associations for lists in distributed policies.

Steps
 

Choose Policies→QoS→SROS QoS→QoS Match→QoS Port List from the NFM-P main menu. The QoS - Port List form opens.


Click Create, or choose a policy in the list and click Properties. The QoS - Port List (Create|Edit) form opens.


Configure the required parameters on the General tab.


Configure Port List members.

Port list policies can contain a maximum of 16 members.

  1. Click on the Port List Members tab.

  2. Click Create, or choose a member entry and click Properties. The Port List Member form opens.

  3. For the Port parameter, choose EQUAL or RANGE in the drop-down, and configure the port value or values.

  4. Save your changes and close the form.


Click OK to save the policy and close the form, or click Apply to save the policy. See To release and distribute a policy to distribute the policy to NEs.

End of steps