To associate a RADIUS Server policy to an Ethernet port for dot1x authentication
Purpose
The RADIUS Server Authentication Policy and RADIUS Server Accounting Policy support IPv6 connectivity for dot1x. Perform this procedure to associate these Radius server policies to Ethernet ports under the 802.1x Port Authenticator tab on the Ethernet Physical Port configuration form.
Steps
1 |
Create one or more RADIUS servers. |
2 |
On the equipment tree, expand Network→NE→Shelf→Card Slot n→Daughter Card Slot n→Port n/n/n. |
3 |
Associate the RADIUS servers under AAA→Radius Server Policy and distribute to the NE |
4 |
Right-click on the Port icon and choose Properties. The Physical Port (Edit) form opens. |
5 |
Click on the 802.1x Port Authenticator tab and then click Select beside the RADIUS Server Policy Authentication and RADIUS Server Policy Accounting parameters, as required. A list of the AAA RADIUS server policies displays. |
6 |
Select and apply the policies, as required. |
7 |
Save your changes and close the form. End of steps |