To configure a Log ID Profile Policy

Purpose

You can configure a Log ID Profile policy that is used to define various source and destination details to retrieve specific log files after the node reboot.

Steps
 

Choose Policies→Log Configuration. The Manage Log Configuration Policies form opens.


Click Create→Log ID Profile or select an existing Log ID Profile (Node Log Policy) and click Properties. The Log ID Profile, Global Policy (Create|Edit) form opens.


Configure the parameters as required.

  • For the Destination parameter, you can assign one of the following: Console, Syslog, SNMPTraps, File, Memory, Netconf, and SubscribedCli.

  • You can assign an Event Filter Log to the Log ID Profile.

  • The Destination parameter can only be set once and cannot be modified. Once set, it becomes read-only and is not a part of the Audit operation. However. the associated fields and other attributes are highlighted, if different, and they can be modified during the Audit process.

  • The Source and Event Filter Log can be modified.

  • If Destination is set as Syslog, you can assign the Syslog and Python policy.

  • If Destination is set as SNMPTraps, the Log ID should be similar as the SNMP group id. For example, if the SNMPTrap group 53 is created on the node, you can create the Log ID as 53 and set its destination as SNMPTrap.

  • When the source is set as Li, the distribution gets successful only on the nodes that has or supports the Li configuration


Click Apply. The Log ID Profile, Global Policy (Create|Edit) form refreshes displaying the Policy Configuration panel.


Click Switch Mode to release and distribute the policy to the required NEs. See To release and distribute a policy for more information.


Close all open forms.

End of steps