To configure a security bypass policy for a 7705 SAR

Purpose

A security bypass policy is a set of match criteria that define what traffic is allowed to pass across a security zone at the L2 service where the policy is applied. If a security bypass policy is not applied, then traffic is filtered based on the security zone configuration; if the policy is applied, then traffic that matches the criteria is allowed to pass regardless of other security zone configurations.

Steps
 
1 

Choose Policies→Security from the NFM-P main menu. The Security Policies form opens.

2 

Click Create and choose Security Bypass Policy, or choose an existing policy and click Properties. The Security Bypass, Global Policy (Create|Edit) form opens with the General tab displayed.

3 

Configure the required general parameters.

4 

Click on the Security Bypass Entry tab and create security bypass entries as required. Traffic matching the criteria defined in the entries is allowed to pass through the site where the policy is applied. Perform the following to create a security bypass entry:

  1. Click Create. The Security Bypass Entry form opens.

  2. Configure the required general parameters.

  3. Click on the Match Criteria tab and configure the match criteria for the entry.

  4. Save your changes.

5 

Save your changes. See To release and distribute a policy to release and distribute the policy to NEs.

End of steps